Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Peoria?
A chimney liner replacement in Peoria typically costs $2,400 to $5,800, and a partial chimney rebuild generally runs $3,200 to $9,500 depending on how much masonry has to come down and go back up. A full rebuild from the smoke chamber up is the larger end of that range. Those are estimates for the Peoria market in 2026, and the written estimate you get after an inspection sets the final price.
Here’s the part most homeowners don’t expect: the liner and the masonry are one system, and pricing one without looking at the other is guesswork. We handle chimney sweep, inspection, and repair as a single job. You get one contractor who finds the cracked flue tile, quotes the liner, and rebuilds the crown, instead of three companies pointing at each other. Call (866) 618-5984 for a free estimate. We answer 24/7.
Key Takeaways
- Liner replacement in Peoria: roughly $2,400 to $5,800.
- Partial masonry rebuild: roughly $3,200 to $6,800. Full rebuild: $6,800 to $9,500 or more.
- Stainless liners from DuraFlex are the standard fix for a cracked or missing clay flue.
- HeatShield resurfacing can rescue a damaged flue for less than a full reline in some cases.
- A free estimate, based on photos and measurements taken during the inspection, sets your actual price.
Chimney Liner & Rebuild Cost Breakdown (2026)
These ranges reflect typical Peoria-area pricing for the work most homes actually need. Every job gets its own line-item written estimate, and that document is what you pay from.
| Line item | Typical 2026 range |
|---|---|
| Stainless steel liner installation (DuraFlex, single appliance) | $2,400 – $4,600 |
| Insulated liner for a wood stove or insert | $3,200 – $5,800 |
| HeatShield flue resurfacing (instead of relining) | $1,800 – $3,600 |
| Crown rebuild or replacement | $650 – $1,600 |
| Partial masonry rebuild (upper courses, firebox to crown) | $3,200 – $6,800 |
| Full chimney rebuild (smoke chamber up) | $6,800 – $9,500+ |
| Flue tile replacement (single section) | $900 – $2,200 |
| Gelco chimney cap with spark arrestor | $250 – $650 |
| Damper replacement | $300 – $750 |
| Smoke chamber parging and repair | $800 – $2,000 |
What pushes a job toward the top of those ranges? Length of the flue run, how much masonry has spalled or separated, and whether the existing liner has to be broken out before a new one goes in. A short, straight flue with sound brickwork is the easy version. A chimney with a flue offset, loose mortar joints, and a failed crown at the same time is the other end of the spectrum. The inspection tells us which one you have before anyone quotes a number.
What Affects Chimney Liner & Rebuild Pricing in Peoria
- Flue height and appliance type. A wood-burning fireplace needs a liner sized to its flue, and a gas insert needs a different one. Taller runs use more liner, which shows up in the price. A single-story home near Old Town Peoria and a two-story house out by Vistancia won’t quote the same.
- Condition of the clay flue tiles. Cracked tiles are the most common reason a liner gets replaced. If the tiles are intact but the joints have gaps, HeatShield resurfacing can sometimes seal the flue for less than a reline. The inspection is what tells the two apart.
- Masonry damage from the desert sun. Peoria’s summers bake the crown and mortar joints, and a crown that has cracked lets water sit against the brick during monsoon season. That’s how a small crown repair turns into a partial rebuild if it goes unaddressed too long.
- Access and roof pitch. Two-story chimneys, steep roof sections, and tight side-yard clearances all require more setup and safety rigging. That’s labor, and it’s in the estimate.
- Whether a cap and damper are included. A failed cap lets in rain and, in Peoria, the occasional monsoon burst, plus birds and debris. Folding a Gelco cap into the same visit usually costs less than scheduling it separately.
- Liner material and brand. DuraFlex liner systems, Olympia Chimney supply, and Famco venting products each serve specific applications. Named, spec-documented materials price differently than anonymous bulk stock, and you can look up the specifications yourself.
Why a Chimney Liner Matters More Than It Seems
A liner is what carries smoke and carbon monoxide up and out of the house. When the clay tiles crack or the flue has gaps, those gases can leak into the attic or living space instead of going up the chimney. That’s the real reason a liner job isn’t optional maintenance. We don’t use scare language, but we won’t soften it either: a compromised flue on a wood-burning appliance is a fire and CO risk, and it deserves a trained specialist, not a weekend project.
This is also where the sweep-and-repair combination pays off. When our technicians sweep the flue and find a cracked tile or a failed joint, the same visit produces the diagnosis and the repair quote. No second company, no handoff. Our technicians have up to 10 years of experience, and every appointment falls squarely within chimney work. Call (866) 618-5984 to set an inspection and get your liner or rebuild priced. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Does a Chimney Rebuild Actually Involve?
A rebuild means taking down damaged masonry and putting it back correctly, starting from the smoke chamber and working up to a new crown. The scope separates a partial from a full job. A partial rebuild handles the upper courses, the crown, and whatever brick has spalled or separated. A full rebuild goes deeper, replacing the smoke chamber and rebuilding the chase from a sound base.
Two things drive the cost on a rebuild. First, how much brick comes down. Second, whether the liner or flue also has to be replaced while the masonry is open. Doing both together usually costs less than two separate jobs, and it’s the reason we quote liner and rebuild as one system rather than two transactions.
Signs You Need a Liner Replacement or Rebuild
- You see cracked or missing clay flue tiles during a sweep.
- Smoke backs up into the room when you light a fire.
- You smell a strong creosote or smoky odor on warm days, even with no fire lit.
- There’s visible spalling brick, crumbling mortar, or a cracked crown on the chimney exterior.
- Water stains or rust streaks appear on the firebox or damper.
- You’ve had a chimney fire, or you don’t know the last time the flue was inspected.
Any one of these is worth a look. Several at once usually means you’re pricing a liner and a rebuild together, not a cleaning.
Why the Brand of Liner and Materials Matters
Not every liner or cap is built the same, and the material underneath the brand name affects how long the repair lasts. We source and install from six recognized chimney-industry brands: DuraFlex liner systems, HeatShield chimney resurfacing, Gelco caps, Olympia Chimney supply, Famco venting products, and Copperfield specialty parts. You can research each of them by name before the estimate, and that’s the point.
That’s also why we’re a chimney-only specialist. We’re not splitting focus across roofing, HVAC, and general handyman work. Every technician on your job does this one system, and it’s the same company that inspects, sweeps, and repairs. No gap between “we found a problem” and “we fixed a problem.”
How to Save on Chimney Liner & Rebuild
- Handle the crown and cap before they fail. A crown repair in the hundreds is far less than a partial rebuild in the thousands. Peoria sun and summer storms are hard on crowns, so a small fix now prevents a large one later.
- Combine the sweep, inspection, and repair in one visit. Every separate appointment adds labor and access costs. One integrated call is the cheaper path.
- Get the inspection first, and get it in writing. A written estimate broken into line items lets you see exactly what’s driving the price, so you can decide what to do now and what can wait.
- Don’t defer a compromised liner. A cracked flue on a wood-burning fireplace is a safety issue, and letting it run adds masonry damage that raises the eventual rebuild cost.
- Ask for the material names in the quote. A quote that lists DuraFlex liner, HeatShield resurfacing, or a Gelco cap is one you can verify. A quote that says “contractor-grade” tells you nothing.
Estimates are free, and we’ll walk you through the line items before you commit. Call (866) 618-5984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Fix a Liner or Rebuild the Same Day?
A liner replacement is often a same-day job when the flue is straight and the masonry is sound. A rebuild is scheduled across the time the scope requires, and same-day is usually not realistic for anything beyond a crown or cap. Call and we’ll tell you what your project looks like. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner replacement cost in Peoria?
Chimney liner replacement in Peoria typically runs $2,400 to $5,800, with insulated liners for wood stoves and inserts at the upper end. A short, straight flue lands lower; a taller run or a damaged flue tile that has to come out lands higher. Call (866) 618-5984 for a free estimate. We answer 24/7.
How much does a chimney rebuild cost in Peoria?
A partial chimney rebuild in Peoria typically costs $3,200 to $6,800, and a full rebuild from the smoke chamber up runs $6,800 to $9,500 or more. How much masonry comes down is the biggest driver, followed by whether the liner is replaced at the same time. The written estimate sets the final price, and estimates are free.
Is it cheaper to repair a chimney or rebuild it?
Repair is usually cheaper when the damage is limited to the crown, cap, or a single flue tile; those jobs run in the hundreds to low thousands. A rebuild is the better value when the masonry itself has failed or the smoke chamber has deteriorated, because patching keeps coming back. An inspection tells you which side of that line you’re on before you spend anything.
Why is my chimney liner so expensive?
The cost is mostly in the liner material and the labor to get it in, and the inspection and flue prep drive the rest. Peoria homes with taller flues or older tile that has to be broken out before the new liner goes in cost more, because there’s more work before the install even starts. The written estimate breaks every line item out so you can see where the money goes.
Can you do a chimney liner and a rebuild on the same visit?
Often, yes. Doing the liner and the masonry work together usually costs less than scheduling them separately, and it’s one contractor responsible for the whole system. Call (866) 618-5984 and we’ll tell you what your project involves. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Happens When You Call
You’ll get a free estimate based on a real inspection, not a phone guess. Our technicians sweep the flue, check the clay tiles, the crown, the cap, and the smoke chamber, and they’ll price the liner or rebuild in line items so you can see exactly why the number is what it is. Every job is planned and installed by a chimney-only specialist working with named materials. If your home is anywhere in Peoria, call (866) 618-5984 to book it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Don’t prop a cracked flue up on hope. Sweep. Inspect. Repair. One call.
Pricing reflects the Peoria market as of 2026. Chimney Sweep Peoria offers free estimates – call (866) 618-5984.
Written by the team at Chimney Sweep Peoria.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Sarah Gallagher"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Kevin Thompson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Marisol Ramirez